USI-7 Re-Configure

From  USI-7 "Surveyor Style" to an MX-7 Milling Machine

 USI-7
"Surveyor Style"

Remove surveying arm and surveyor platform

Install: Motor & split arm module

Install: Model tilt platform module

 USI-7
"Surveyor Style"

Scroll down to see next conversion

To a Re-Configured  fully functioning MX-7 Milling Machine.

Time required approximately five minutes

* Tools required an 1/8" Allen wrench

* included with conversion

USI-7 Re-Configure

From  USI-7 "Surveyor Style" to a Highriser Pendulum Surveyor

 USI-7
"Surveyor Style"

Remove surveying arm & column tube

Install: Highriser column and pendulum

Time required approximately 10 minutes

* Tools required one Allen wrench

* included with conversion

The USI-7 is now re-configured to a fully functioning Highriser.

Call and talk to our technical department concerning the cost of a specific conversion kit.

Solid oak base is available for esthetic re-configuration.

Re- Configure any MX Series

into another MX Series

click this link